How to start the wireless GPS tracker sleep state?

Similar to mobile phones, hibernation is to reduce energy consumption and extend the use time. The wireless GPS tracker is the same as the GPS tracking device with its own power supply. Its battery capacity is limited; the battery life is determined by its work. The frequency is determined. Therefore, in order to improve the battery storage capacity of the wireless GPS tracker and extend the duration of its use, most GPS positioning manufacturers will set a sleep mode on the device to reduce battery consumption.

So, how does the wireless GPS tracker initiate sleep? Let me give you a brief introduction.

If the GPS tracking device is required to enter the sleep state, the GPS device must first have a sleep mode. However, not all wireless GPS tracking devices currently on the market have a sleep mode. Therefore, everyone should first understand before purchasing. Imagine if the product itself does not have this feature, how can it be enabled?

Purchase Notes:

Currently, there are three common sleep modes for wireless GPS trackers: smart standby mode, timing mode, and sleep mode.

The difference or definition between them:

1, smart standby mode:

Smart standby mode is actually the best choice for users. In this mode, the wireless GPS tracking device does not upload positioning data to the platform. When the user wants to know the location information of the vehicle, the wireless GPS tracker will upload the information for the user as long as the activation command is sent autonomously. After the end, the device will automatically enter again. Intelligent standby mode, continuous power saving.

2, timing mode:

For customers who have to query the location information once a day, they feel that each time the command activation is too much trouble, the timed upload mode can be turned on. As long as the device uploads the location information every day, the GPS tracker will automatically upload the data according to the time set by the user. After the end, the positioning device will automatically enter the standby mode until the next time the data is uploaded. The timed upload mode is also a mode of work that is more power efficient.

3, sleep mode:

As long as the GPS tracking device senses vibration, it will go out of sleep. That is to say, it does not require the user to trigger the work instruction autonomously. As long as the GPS tracker vibration sensitivity is reached, the device is immediately woken up and automatically enters the working state to upload the positioning data. If the vibration is not detected for a long time, the device will enter the sleep state.

If you want the wireless GPS tracking device to enter the sleep mode, the user needs to set according to the reference manual, because different models of wireless GPS tracker enter the sleep is different.

To learn more about various types of vehicle gps tracker, click here：

www.gpstracker-factory.com

Email:joe@great-will.com.cn

Tel: +86-13516682778